It may have looked like a simple bracket but it took a bit of labor to make The 1/2" rod that she says would not fit through the hole does not sound accurate at all That hole was punched with a hydraulic punch using a 1/2" round punch and die Then the hole was ground out to a degree angle to allow the rod and stake to slip through at the precise angle she requested, degrees The only way we could check to see if the degree angle was achieved was to slide the rod through the hole and use a digital level that displays the degrees off of square Each bracket had the rod slipped through the hole and was verified to be at degrees exactly Perhaps the rods you are using on these new brackets are a different size than the ones we sent you that were intended to work with the first batch If you use one of our rods it will fit through the hole at the exact angle requested because we punched, ground, and checked each one ourselvesAgain I am sorry that after everything we built to exact specifications, that these six pieces don't fit with the rods you purchased elsewhere but we built them for you and you will have to pay the $for the brackets that you requested
It may have looked like a simple bracket but it took a bit of labor to make The 1/2" rod that she says would not fit through the hole does not sound accurate at all That hole was punched with a hydraulic punch using a 1/2" round punch and die Then the hole was ground out to a degree angle to allow the rod and stake to slip through at the precise angle she requested, degrees The only way we could check to see if the degree angle was achieved was to slide the rod through the hole and use a digital level that displays the degrees off of square Each bracket had the rod slipped through the hole and was verified to be at degrees exactly Perhaps the rods you are using on these new brackets are a different size than the ones we sent you that were intended to work with the first batch If you use one of our rods it will fit through the hole at the exact angle requested because we punched, ground, and checked each one ourselvesAgain I am sorry that after everything we built to exact specifications, that these six pieces don't fit with the rods you purchased elsewhere but we built them for you and you will have to pay the $for the brackets that you requested