Automotive Racing Products,Inc.

Review: I bought pressure plate bolts for a 2001 Trans Am to fit on a Fidanza flywheel. The stock bolts went in and out of the mounting holes perfectly. The ARP bolts went in, but where a little long. The bolts were torqued to 52 ft. Lbs, as specified by factory specs. Upon removal of the bolts 2 of the 6 immediateley rolled galleds locking the bolts in place and required me to use extreme force to remove them completely. The other 4 came out dificult but seem to be usable. I sent a message to ARP on 7/31/14 explaining the problem I had encountered. It states on the email confirmation to allow 2 buisness days for a reply. On 7/7/14 I called in to ARP techincal support, sat on hold for 10 minutes, and talked to a representative. The person I talked to was of no real help and did not really comprehend what a flywheel was. Funny since he works at a place that builds parts for autombiles. He then proceded to tell me the bolts had bottomed out on something behind the flywheel, which there is nothing close. I was hoping ARP would like to see the flywheel and bolts so nobody else would have to go through this headache, and hopefully replace the item that their product destroyed. The only thing he had to offer that the bolts where designed to fit a stock flywheel, not a fidanza flywheel. As stated above the stock ones worked just fine.Desired Settlement: I would like my flywheel replaced and my arp bolts refunded.

Review: This company made as stud for Genesis Coupe 2012 for the Main Crankshaft. The measures fromthose studs are too short and wth high power the studs will start to damage the thread on block this engineering and manufacturing error cost me more than $2,000 on labor and parts. I contacted them with pictures of the isue and they said it was my fault on how I mounted the studs.

Have friends with same year car and part issue so this is not something normal or error of labor. I also provided email and pictures of the other affected people.Desired Settlement: I want they refund me or pay me all the damages their wrong design of product cost me in mi motor and time.