Sign in

Olander Corporation, The

Sharing is caring! Have something to share about Olander Corporation, The? Use RevDex to write a review
Reviews Electronic Instruments Olander Corporation, The

Olander Corporation, The Reviews (6)

Revdex.com: I have reviewed the response made by the business in reference to complaint ID [redacted] , and have determined that this proposed action would not resolve my complaint For your reference, details of the offer I reviewed appear below The company states that the second technician found the problem to be a cleaning issue That is not correct The 2nd techthought the problem was hard water deposits That also did not prove to be accurate, as I took his advice and tried his products and a great amount of elbow grease, which he stated would be necessary, and the problem did not resolve The problem is the finish wearing away along the top edge of the tub so that the black underneath the tub is showing through If it was a problem with the nylon scrubber, then the whole tub would be showing black underneath However, that is not the case--only the edges of the tub are affected by this problem I invited the engineer who made this product to come out and figure out how to solve the problem, but I was ignored If the company is going to insist that the problem is using a nylon scrubber, which is not abrasive (nothing like steel wool), then I will have to take the matter to court My other tub does not suffer from this problem and it is a year older and has used the same cleaning materials that have been used on the AIt is still gleaming white The problem is in the materials used to make the Atub No tub should be sold that cannot be cleaned with regular bathroom cleaning materials, and no bathtub should be sold that can't withstand hard water I am certain there are many other people who are complaining about this same problem, and I am not going to let this company ignore this problem Regards, [redacted]

We're working with one of our wholesaler's to assist [redacted] with her tub replacement and have settled the complaint to the consumer's satisfaction

Aquatic has worked with homeowner on issue Aquatic authorized 1st independent repair company 8/24/to inspect the unit That Company found it to be a cleaning issue The homeowner was not satisfied with this As a result Aquatic authorized sending out a second
Independent Company on 12/1/for another opinion Which resulted in being a cleaning issue.Homeowner stated in an email 1-16-she uses a nylon scrubbing pad to clean the unit This is not recommended, it is like sand paper and takes off the finish.Based on the two individual reports Aquatic made the determination that this is not a warranty issue

We're working with one of our wholesaler's to assist [redacted] with her tub replacement and have settled the complaint to the consumer's satisfaction.

Revdex.com:
I have reviewed the response made by the business in reference to complaint ID [redacted], and find that this...

resolution would be satisfactory to me.  I will wait for the business to perform this action and, if it does, will consider this complaint resolved.
Regards,
[redacted]

Revdex.com:
I have reviewed the response made by the business in reference to complaint ID [redacted], and have determined that this proposed action would not resolve my complaint.  For your reference, details of the offer I reviewed appear below.
The company states that the second technician found the problem to be a cleaning issue.  That is not correct.  The 2nd tech. thought the problem was hard water deposits.  That also did not prove to be accurate, as I took his advice and tried his products and a great amount of elbow grease, which he stated would be necessary, and the problem did not resolve.  The problem is the finish wearing away along the top edge of the tub so that the black underneath the tub is showing through.  If it was a problem with the nylon scrubber, then the whole tub would be showing black underneath.  However, that is not the case--only the edges of the tub are affected by this problem.  I invited the engineer who made this product to come out and figure out how to solve the problem, but I was ignored.  If the company is going to insist that the problem is using a nylon scrubber, which is not abrasive (nothing like steel wool), then I will have to take the matter to court.  My other tub does not suffer from this problem and it is a year older and has used the same cleaning materials that have been used on the A2. It is still gleaming white.  The problem is in the materials used to make the A2 tub.  No tub should be sold that cannot be cleaned with regular bathroom cleaning materials, and no bathtub should be sold that can't withstand hard water.  I am certain there are many other people who are complaining about this same problem, and I am not going to let this company ignore this problem.  Regards,
[redacted]

Check fields!

Write a review of Olander Corporation, The

Satisfaction rating
 
 
 
 
 
Upload here Increase visibility and credibility of your review by
adding a photo
Submit your review

Olander Corporation, The Rating

Overall satisfaction rating

Address: 14101 NE 186th St # A, Woodinville, Washington, United States, 98072-6841

Phone:

Show more...

Fax:

+1 (425) 486-8220

Web:

This website was reported to be associated with Olander Corporation, The.


E-mails:

Sign in to see

Add contact information for Olander Corporation, The

Add new contacts
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | New | Updated