Sign in

Plastics Machinery Group

Sharing is caring! Have something to share about Plastics Machinery Group? Use RevDex to write a review
Reviews Plastics Machinery Group

Plastics Machinery Group Reviews (7)

From: Gina D [redacted] Date: Thu, May 7, at 11:AMSubject: Complaint ID [redacted] To: " [redacted] @cleveland.Revdex.com.org" < [redacted] @cleveland.Revdex.com.org>Good Morning,I am sending this email in response to your letter dated 4/30/regarding complaint ID [redacted] from Sonny M [redacted] After speaking to all our employees who were involved with this transaction, I have ascertained that the following events took place:· We agreed to try and found buyers for two used machines that Sonny M [redacted] wanted to sell.· We sold one of them in December of When the buyer tried to use the machine, it did not run properly and needed $4,of repair work to be used We agreed to pay half of this repair cost as a courtesy to the buyer since the machine was misrepresented by MrM [redacted] as in good working condition.· We sent four clients to see the second machine that is in question and all of them stated the machine is not worth anything and should be scraped.· We never agreed to buy the machines, we are brokers who find buyers for the used equipment that the seller would like to sell Please let me know if you need any additional information from us regarding this matter.Best Regards,Gina D [redacted] Plastics Machinery Group Bainbridge Road, Suite Solon, Ohio Phone: (440) 498-Fax: (440) 498-Email: [email protected]

From: Sonny M [redacted] Date: Mon, Jun 1, at 10:AMSubject: Reply from requestTo: [redacted] @cleveland.Revdex.com.org***,At your request I have attached the contract that was made between PMG and Eastern BioPlasticsI have numbered the pages in the top right and if you look on page three you will see what I am speaking ofIn the terms section of the page it says that if they got the chance to sell our equipment on page one they would purchase the equipment on page three Please feel free to call the number below if you need much more detailed information or by emailThanks,Sonny M [redacted] PresidentEastern BioPlasticsMtCrawford, VA(540) 437-1984easternbioplastics.comfeathersorb.com(see attachments)

Response taken over the phone on 6/1/at 10:AM by Revdex.com staff (LL) Gina D*** from Plastics Machinery Group advised have sent their responses and to have the consumer contact their attorney for any additional responses

Response taken over the phone on 6/1/at 10:AM by Revdex.com staff (LL)
Gina D*** from Plastics Machinery Group advised have sent their responses and to have the consumer contact their attorney for any additional responses

From: Sonny M*** Date: Mon, Jun 1, at 10:AMSubject: Reply from requestTo: ***@cleveland.Revdex.com.org
***,
At your request I have attached the contract that was made between PMG and Eastern BioPlasticsI have numbered the pages in the top right and if you look on page three you will see what I am speaking ofIn the terms section of the page it says that if they got the chance to sell our equipment on page one they would purchase the equipment on page three. Please feel free to call the number below if you need much more detailed information or by email.
Thanks,
Sonny M***PresidentEastern BioPlasticsMtCrawford, VA(540) 437-1984easternbioplastics.comfeathersorb.com
(see attachments)

From: Sonny M[redacted] <[email protected]>Date: Mon, Jun 1, 2015 at 10:10 AMSubject: Reply from requestTo: [redacted]@cleveland.Revdex.com.org[redacted],At your request I have attached the contract that was made between PMG and Eastern BioPlastics. I have numbered the pages in the top right and if you look on page three you will see what I am speaking of. In the terms section of the page it says that if they got the chance to sell our equipment on page one they would purchase the equipment on page three.  Please feel free to call the number below if you need much more detailed information or by email. Thanks,Sonny M[redacted]PresidentEastern BioPlasticsMt. Crawford, VA(540) 437-1984easternbioplastics.comfeathersorb.com(see attachments)

From: Gina D[redacted] <[email protected]>Date: Thu, May 7, 2015 at 11:51 AMSubject: Complaint ID [redacted]To: "[redacted]@cleveland.Revdex.com.org" <[redacted]@cleveland.Revdex.com.org>Good Morning,I am sending this email in response to your letter dated 4/30/15 regarding complaint ID [redacted] from Sonny...

M[redacted].  After speaking to all our employees who were involved with this transaction, I have ascertained that the following events took place:·        We agreed to try and found buyers for two used machines that Sonny M[redacted] wanted to sell.·        We sold one of them in December of 2014.  When the buyer tried to use the machine, it did not run properly and needed $4,000.00 of repair work to be used.  We agreed to pay half of this repair cost as a courtesy to the buyer since the machine was misrepresented by Mr. M[redacted] as in good working condition.·        We sent four clients to see the second machine that is in question and all of them stated the machine is not worth anything and should be scraped.·        We never agreed to buy the machines, we are brokers who find buyers for the used equipment that the seller would like to sell.  Please let me know if you need any additional information from us regarding this matter.Best Regards,Gina D[redacted] Plastics Machinery Group 31005 Bainbridge Road, Suite 6 Solon, Ohio 44139 Phone: (440) 498-4000 Fax: (440) 498-4001 Email: [email protected]

Check fields!

Write a review of Plastics Machinery Group

Satisfaction rating
 
 
 
 
 
Upload here Increase visibility and credibility of your review by
adding a photo
Submit your review

Plastics Machinery Group Rating

Overall satisfaction rating

Address: 31005 Bainbridge Road, Solon, Ohio, United States, 44139

Phone:

Show more...

Add contact information for Plastics Machinery Group

Add new contacts
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | New | Updated