11/10/2015Z-Auto CenterA Baltimore AveLaurel, MD 20707Dear [redacted] , We understand your concern when you brought your vehicle to our auto repair shop We performed a Maryland State Inspection The requirements are to inspect the safety of your vehicle, in meeting the requirements in accordance with the law of the state of Maryland The inspector made a mistake on the inspection form, which stated that the brakes failed as opposed to passing The inspector should have created a new form, and apologize for this error The front brakes were measured at 5/(Left & Right) and rear brakes were 8/which passed the requirements of at least being greater than 2/32” This in turn passed the brake inspection, as you indicated it was serviced at [redacted] Auto Repair Center The front rotors failed as it did not meet the minimum requirements The actual measurement of your front rotors are Discard /(Left) and Discard/(Right) the rear rotors are Discard/(Left and Right) We follow all the rules and regulations of the Maryland State Inspection accordance with the Code of Maryland Regulations (COMAR) Upon repair of your front rotors we offer to re-inspect your vehicle, and re-measure your rotors to ensure they meet the minimum specifications Please let us know if you have any additional questions or concerns.Regards,Z Auto Center Management Regards, Ranbir B [redacted] email: [redacted] @ [redacted] .com Cell:###-###-####
11/10/2015Z-Auto Center14721 A Baltimore AveLaurel, MD 20707Dear [redacted], We understand your concern when you brought your vehicle to our auto repair shop. We performed a Maryland State Inspection. The requirements are to inspect...
the safety of your vehicle, in meeting the requirements in accordance with the law of the state of Maryland. The inspector made a mistake on the inspection form, which stated that the brakes failed as opposed to passing. The inspector should have created a new form, and apologize for this error. The front brakes were measured at 5/32 (Left & Right) and rear brakes were 8/32 which passed the requirements of at least being greater than 2/32”. This in turn passed the brake inspection, as you indicated it was serviced at [redacted] Auto Repair Center. The front rotors failed as it did not meet the minimum requirements. The actual measurement of your front rotors are 1.102 Discard /1.079 (Left) and 1.102 Discard/1.078 (Right) the rear rotors are .708 Discard/.806 (Left and Right). We follow all the rules and regulations of the Maryland State Inspection accordance with the Code of Maryland Regulations (COMAR). Upon repair of your front rotors we offer to re-inspect your vehicle, and re-measure your rotors to ensure they meet the minimum specifications. Please let us know if you have any additional questions or concerns.Regards,Z Auto Center Management. Regards, Ranbir B[redacted]email: [redacted]@[redacted].com Cell:###-###-####
11/10/2015Z-Auto CenterA Baltimore AveLaurel, MD 20707Dear [redacted] , We understand your concern when you brought your vehicle to our auto repair shop We performed a Maryland State Inspection The requirements are to inspect the safety of your vehicle, in meeting the requirements in accordance with the law of the state of Maryland The inspector made a mistake on the inspection form, which stated that the brakes failed as opposed to passing The inspector should have created a new form, and apologize for this error The front brakes were measured at 5/(Left & Right) and rear brakes were 8/which passed the requirements of at least being greater than 2/32” This in turn passed the brake inspection, as you indicated it was serviced at [redacted] Auto Repair Center The front rotors failed as it did not meet the minimum requirements The actual measurement of your front rotors are Discard /(Left) and Discard/(Right) the rear rotors are Discard/(Left and Right) We follow all the rules and regulations of the Maryland State Inspection accordance with the Code of Maryland Regulations (COMAR) Upon repair of your front rotors we offer to re-inspect your vehicle, and re-measure your rotors to ensure they meet the minimum specifications Please let us know if you have any additional questions or concerns.Regards,Z Auto Center Management Regards, Ranbir B [redacted] email: [redacted] @ [redacted] .com Cell:###-###-####
11/10/2015Z-Auto Center14721 A Baltimore AveLaurel, MD 20707Dear [redacted], We understand your concern when you brought your vehicle to our auto repair shop. We performed a Maryland State Inspection. The requirements are to inspect...
the safety of your vehicle, in meeting the requirements in accordance with the law of the state of Maryland. The inspector made a mistake on the inspection form, which stated that the brakes failed as opposed to passing. The inspector should have created a new form, and apologize for this error. The front brakes were measured at 5/32 (Left & Right) and rear brakes were 8/32 which passed the requirements of at least being greater than 2/32”. This in turn passed the brake inspection, as you indicated it was serviced at [redacted] Auto Repair Center. The front rotors failed as it did not meet the minimum requirements. The actual measurement of your front rotors are 1.102 Discard /1.079 (Left) and 1.102 Discard/1.078 (Right) the rear rotors are .708 Discard/.806 (Left and Right). We follow all the rules and regulations of the Maryland State Inspection accordance with the Code of Maryland Regulations (COMAR). Upon repair of your front rotors we offer to re-inspect your vehicle, and re-measure your rotors to ensure they meet the minimum specifications. Please let us know if you have any additional questions or concerns.Regards,Z Auto Center Management. Regards, Ranbir B[redacted]email: [redacted]@[redacted].com Cell:###-###-####